Specially Crafted 3D Prancing Moose Emblems Available in CHROME - SILVER - or BLACK
TWO SIZES LARGE:88 mm tall x 57 mm wide (about 3.5 x 2.25 inches). SMALL:68 mm tall x 44 mm wide (about 2.7 x 1.75 inches).
4 FINISHES AVAILABLE. POLISHED CHROME (available Large size only), MATTE SILVER PLATED (available Large or Small),
or Gloss BLACK Chrome (available Large or Small), or UNFINISHED (Large or Small available). You can CUSTOM PAINT it yourself.
NOTE about Magnetic Backing:
Some of you will request magnetic backing. Yes, I can supply this, but, it may not be optimal for a car. Probably not enough sticking power.
It's ok for a refrigerator for sure. This has not been tested for a car. If you select this option, I will supply a shaped piece of magnetic material (shown below),
but it will be up to YOU to actually apply it to the back of the moose.
You can test the magnet on your car before adding it to the emblem.
Suggestions for attaching any emblem to a GRILL:
Some of you
have asked about attaching to a grill. Here are some ideas below using a
1/2 inch zip-tie mount that is easy to find. https://www.amazon.com/Adhesive-Mounting/B079G4J8VF Peel the backing off the emblem and attach a zip tie mount or two. Use a zip tie to attach to your grill. Pretty simple.
Installation Examples
50 mm CHROME or BLACK CHROME
Grill or Body Emblems After
getting many requests for some custom recreations of
these 2 inch badges that Volvo offered for the grill or body, I'm now
offering chrome replicas of these emblems with custom designs.
Volvo originally offered these below. My new emblems offered below are new custom recreations (not the super expensive Genuine Volvo ones).
Here's a comparison. One
of Volvos' genuine badges is shown below (first image). The new emblems will come with a
variety of design inserts. Now available in BLACK CHROME too.
Available with ADHESIVE backing (standard) with grill mounts if needed, or with optional MAGNETIC backing. Adhesive backing versions will come with two ZIP TIE GRILL MOUNTS (without zip ties), which will help you to attach to a GRILL if you like.
Chrome or BLACK Border Slanted Body Emblems. Gloss inlay 27 mm Tall (SMALL Size)
Made to accompany your factory slanted body emblems and set your car apart.
Size: 27 mm tall, same size as original R Design emblem shown above. 3M VHB adhesive backing.
SMALL 27 mm tall emblems below.
Flag Section CLICK HERE
Chrome Emblem Black Emblem
CHROME PRANCING MOOSE Slanted Emblem. Small 27 mm PN 102727PM1b (brighter yellow). Gloss finish.
BLACK PRANCING MOOSE Slanted Emblem. Small 27 mm PN 102727BPM1b (brighter yellow). Gloss finish.
CHROME Red-White-Black Classic Volvo Motorsport Emblem. A tribute to the classic TWR Volvo Motorsport emblem that came on the 850 T5R. Small 27 mm PN 102727M2. Gloss finish.
Black Red-White-Black Classic Volvo Motorsport Emblem. A tribute to the classic TWR Volvo Motorsport emblem that came on the 850 T5R. Small 27 mm PN 102727BM2. Gloss finish.
This badge pays tribute to the legendary Volvo Motorsport
campaign by TWR (Tom Walkinshaw Racing) who raced the 850 wagons in BCTC
(British Touring Car Championship).
Chrome Emblem
Black Emblem
CHROME PRANCING MOOSE PLUG-IN Slanted Emblem. Small 27 mm PN 102727PMPI2 (brighter yellow). Gloss finish.
Black PRANCING MOOSE PLUG-IN Slanted Emblem. Small 27 mm PN 102727BPMPI2 (brighter yellow). Gloss finish.
CHROME HYDROCARBON EDITION #2 (Flame) Emblem. Not an E.V. fan? This might be for you.
Created by special request.
Small 27 mm PN 102727HYDRO2. Gloss finish.
Black HYDROCARBON EDITION #2 (Flame) Emblem. Not an E.V. fan? This might be for you.
Created by special request.
Small 27 mm PN 102727BHYDRO2. Gloss finish.
CHROME Grateful Slanted Emblems. Several Styles. Small 27 mm Chrome with GLOSS finish. PN 102727GD2 Steal Your Face (skull) PN 102727GD4 (Lightning) PN 102727GD6 (Dancing Bear) PN 102727GD7 (Skeleton)
PN 102727GD8 (Garcia's Tiger) PN 102727GD9 (Garcia's Wolf)
BLACK Grateful Slanted Emblems. Several Styles. Small 27 mm Black with GLOSS finish. PN 102727BGD2 Steal Your Face (skull) PN 102727BGD4 (Lightning) PN 102727BGD6 (Dancing Bear) PN 102727BGD7 (Skeleton)
PN 102727BGD8 (Garcia's Tiger) PN 102727BGD9 (Garcia's Wolf BLACK) PN 102727BGD10 (Garcia's Wolf WHITE)
Misc. Other Custom or Special Flag Emblem. CHROME Emblem. Small 27 mm PN 102727Spec. Gloss finish.
Special request menu for a flag not shown above. Please use text box.
Misc. Other Custom or Special Flag Emblem. BLACK Emblem. Small 27 mm PN 102727Spec. Gloss finish.
Special request menu for a flag not shown above. Please use text box.
Special Large Chrome Slanted Body Emblems.
Matte or Gloss inlay. 35mm Tall (LARGE)
Size: 35 mm tall shown below. Same height as the original RECHARGE emblem below, which always came with a MATTE Finish inlay. May be used to accompany your factory slanted body emblem and set your car apart.
MATTE Finish or GLOSS Finish inlay is available.
Available with MATTE (non-glare) or Gloss Finish. NOTE: The original Volvo RECHARGE badge shown above came with a MATTE Finish. All have 3M VHB adhesive backing. Many Styles Available
LARGE 35mm CHROMED emblems below. Flag Section CLICK HERE
BRIGHT YELLOW
CHROME PRANCING MOOSE Slanted Emblem. Large 35mm PN 103535PM1b (brighter yellow) MATTE Finish or GLOSS Finish
CHROME Red-White-Black Classic Volvo Motorsport Emblem. A tribute to the classic TWR Volvo Motorsport emblem that came on the 850 T5R. Large 35mm PN 103535M2 MATTE Finish or GLOSS Finish
This badge pays tribute to the legendary Volvo Motorsport
campaign by TWR (Tom Walkinshaw Racing) who raced the 850 wagons in BCTC
(British Touring Car Championship).
CHROME PRANCING MOOSE Plug-In Slanted Emblem. Small 35 mm PN 103535PMPI4 Gray Moose on White. MATTE Finish or GLOSS finish.
CHROME Misc. Special Custom or Other Flag Emblem. 35 mm PN 103535Spec. Gloss finish. MATTE Finish or GLOSS Finish Special request menu for flag or custom emblem not shown above. Please use text box to describe.
Special Gloss BLACK Border Emblems. Gloss inlay. 35mm Tall (LARGE)
May be used to accompany your factory BLACK slanted body emblems and set your car apart.
Size: 35 mm tall, same height as original RECHARGE BLACK emblems shown here with gloss finish inlays. 3M VHB adhesive backing. Many Styles Available CUSTOMER PIC.
LARGE 35mm BLACK emblems below. With gloss inlays. If you don't see a color combo you like below, feel free to email. Flag SectionCLICK HERE
BRIGHT YELLOW
Black PRANCING MOOSE Slanted Emblem. Gloss Black Border
Large 35mm PN 103535BPM1b (brighter yellow) GLOSS Finish
Black Red-White-Black Classic Volvo Motorsport Tribute. A tribute to the classic TWR Volvo Motorsport emblem that came on the 850 T5R. Gloss Black Border
Large 35mm PN 103535BM2 GLOSS Finish
This badge pays tribute to the legendary Volvo Motorsport
campaign by TWR (Tom Walkinshaw Racing) who raced the 850 wagons in BCTC
(British Touring Car Championship).
Black PRANCING MOOSE PLUG-IN Slanted Emblem. Gloss Black Border
Large 35mm PN 103535BPMI4 (Gray Moose Plug-In, WHITE Background) GLOSS Finish
CUSTOM
Black Emblem Special Custom or Other Flag. Gloss Black Border 35 mm PN 103535Spec. Gloss finish. GLOSS Finish Special request menu for almost any emblem. Use text box below please.
Historical
reports suggest that this emblem was originally made as a limited
production badge created by Volvo Brazil as part of a global advertising campaign.
After many requests by customers to bring this emblem back to life, I
commissioned the BELOW re-creations.
These are now available.
High Tack 3M Peel and Stick Adhesive Backing PN: 105520SW SIZE: 55 x 20 mm
NEW MATTE SILVER CHROME EMBLEMS with Dome Inserts Emblem size approx 3.6 x 0.7 inches
These are new 92 mm wide body or grill emblems. Matte silver chrome plated. With adhesive backing.
These may be ordered with your choice of poly dome insert.
The POLY DOMES above may also be used by THEMSELVES without the need for a plastic badge. CLICK HERE
Installation suggestion for this badge on a GRILL
If you buy a super expensive Genuine R Design grill badge, it will come
with a plastic grill mounting device for the specific grill it was made
for. Since Volvo has offered many different grills, those factory badges are all
quite different. None are universal. I have photos of known factory
badges I have seen in this page CLICK HERE.
Here are a couple of suggested methods below you may use for grill
attachment of my universal badge. YOUR specific grill may be
different, so some improvisation may be needed. Your comments, photos, ideas or questions are welcomeCONTACT.
This method below uses some 1/2 inch zip-tie mounts.
This method below uses a couple small binder clips.
NEW SILVER CHROME EMBLEMS with Printed Decal Inserts Emblem size approx 3.6 x 0.7 inches
These are new 92 mm wide body or grill emblems that I have designed.
They are matte silver chrome plated and have adhesive backing.
These may be ordered with your choice of design insert shown BELOW. Each
design has a STYLE number. You may put that Style number in the order menu below.
After adding shipping, click "View Cart" button below to Check Out.
----------------------------------------------
or Please Select INTERNATIONAL Shipping Option
After adding shipping, click "View Cart" button below to Check Out.