Volvo 700 or 900 New OUTER DOOR WINDOW SCRAPER MOLDINGS |
NEW
OUTER WINDOW SCRAPER MOLDINGS These are brand new outer rubber scraper moldings with correct felt backing on the glass side for all Volvo 700/900/S/V90 models. These will mount in your existing outer metal door window trim chanel and the felt side rests against the glass. They are made to replace your old cracked and hardened outer scraper moldings. They come in pre-cut lengths with details instructions. TWO SIZES (Two Widths) AVAILABLE. There is no need to remove them from your car to measure the thickness: |
|
(see below chart) IN STOCK |
|
Detailed PDF
Installation Instructions (click here)
Adobe Reader required |
|
|
|
CHART below for Molding WIDTH used in Volvo
700 / 900 / S90 / V90 Volvo originally made THREE different molding widths during the 1983-1997 700/900/S90/V90 production years. Below I have begun compiling which cars are found with which widths. Volvo was not entirely consistent. Some years have been found with more than one size. |
1983 - 760: 3/4 inch (19
mm) 1984 - 740: 3/4 inch (19 mm) 1984 - 760: 3/4 inch (19 mm) 1985 - 740: 3/4 inch (19 mm) 1985 - 760: 3/4 inch (19 mm) 1986 - 740: 3/4 inch (19 mm) 1986 - 760: (not yet measured) 1987 - 740: (not yet measured) 1987 - 760: (not yet measured) |
1987 - 780: (not yet measured) 1988 - 740: 11/16 inch (17.4 mm) 1988 - 760: (not yet measured) 1988 - 780: (not yet measured) 1989 - 740: 11/16 inch (17.4 mm) 1989 - 760: (not yet measured) 1989 - 780: 1/2 inch (12.7 mm) 1990 - 740: 11/16 inch (17.4 mm) 1990 - 760: (not yet measured) |
1990 - 780: 1/2 inch
(12.7 mm) 1991 - 740: 11/16 inch (17.4 mm) 1991 - 940: 11/16 inch (17.4 mm) 1991 - 780: 1/2 inch (12.7 mm) 1992 - 740: 11/16 inch (17.4 mm) 1992 - 940: 11/16 inch (17.4 mm) 1992 - 960: 1/2 inch (12.7 mm) 1993 - 940: 1/2 inch (12.7 mm) or 11/16 inch (17.4 mm) 1993 - 960: 1/2 inch (12.7 mm) |
1994 - 940: 1/2 inch
(12.7 mm) or 11/16 inch (17.4 mm) 1994 - 960: 1/2 inch (12.7 mm) 1995 - 940: 1/2 inch (12.7 mm) or 11/16 inch (17.4 mm) 1995 - 960: 1/2 inch (12.7 mm) 1996 - 940 1/2 inch (12.7 mm) 1996 - 960: 1/2 inch (12.7 mm) 1997 - 940: 1/2 inch (12.7 mm) 1997 - S90 1/2 inch (12.7 mm) 1997 - V90: 1/2 inch (12.7 mm) |
The above information comes from customer input and junkyard research. It is not complete. If you can help to complete any missing info, please EMAIL. |
700 / 900 / S90 Outer Window Scraper Moldings
ORDER HERE: >>> STEP #2 <<< Choose USA Shipping or International Shipping.
>>> STEP #3 <<< Click below to View Cart and/or Check Out |