D A V E ' S V O L V O P A G E
|
| eturn to Main Gauge Face Page Updated: February 8, 2026 VIEW CART CONTACT 
|
|
D A V E ' S V O L V O P A G E
|
| eturn to Main Gauge Face Page Updated: February 8, 2026 VIEW CART CONTACT
|
|
|
|
I offer original looking face overlays and custom face overlays
for all 140 gauge cluster sets. |
| Below Photo Style A: 140 5-Gauge Rallye Black faces.
Original Restoration Sets |
| Below Photo Style B: 140 5-Gauge Rallye Black faces. Custom Set - Yellow Text Available with a 130 MPH or 200 kmh speedometer. CLICK ON PHOTO FOR HIGHER RES 
|
| Below Photo Style C: 140
5-Gauge Rallye Black faces. Custom Set - Rallye Style Yellow Text Created in the same style as the 240 R-Sport Rallye faces.. Available with a 130 MPH or 200 kmh speedometer. CLICK ON PHOTO FOR HIGHER RES 
|
| Below Photo Style D: 140 4-Gauge GT Black faces This set is intended to restore the faces back to a new appearance. It is available with a 130 MPH or 200 kmh speedometer. CLICK ON PHOTO FOR HIGHER RES 
|
| Below Photo Style E: 140
4-Gauge GT Black faces. Custom Set - Rallye Style Yellow Text Created in the same style as the 240 R-Sport Rallye faces.. Available with a 130 MPH or 200 kmh speedometer. CLICK ON PHOTO FOR HIGHER RES 
|
| WHITE FACES |
| Below Photo Style F: 140 5-Gauge Rallye WHITE faces. This set is intended to create a high quality white face set. It is available with a 130 MPH or 200 kmh speedometer. Also there are two different Oil Pressure faces to choose from. CLICK ON PHOTO FOR HIGHER RES  
|
| Below Photo Style G: 140
4-Gauge GT Custom WHITE faces. This set is intended to create a high quality white face set. It is available with a 130 MPH or 200 km/h speedometer. CLICK ON PHOTO FOR HIGHER RES 
|
 Adhesion Promoter is recommended to
improve the installation of gauge face overlays. It is
not needed in all situations, however if your car may be
subjected to high interior temperatures frequently
(parked outside) or many times over the years, the
adhesive on the backs of overlays can soften and allow
the edges to lift. Applying a little of this before
installation on the face plate edges will greatly improve
adhesion. For convenience, a cotton swab is included.
This isn't some mythical snake-oil. It has been tested
and works great.Applying this stuff is easy. Dip the cotton swab in the liquid and smear the edges of the face plates where the overlays will be. It dries in seconds. CAUTION: Using this stuff makes things stick very well, so be careful when placing the overlay down. It will be harder to lift and re-position. OUT OF STOCK |
| All faces have a Matte/Non-Glare Laminated UV Poly Film over the front to protect the finish. |
| These instructions are
specifically for 240 R-Sport gauges,
however the face plates in these 140 gauges are
nearly identical, so these instructions will help. Installation Instructions: https://www.davebarton.com/pdf/240FaceInstallR-Sportgauges.pdf (0.4 mb PDF) |
All 140 Sets
are priced as follows:
|
 |
|
